Method comparison · Updated November 19, 2026

Mudjacking vs Foam Lifting in Fort Wayne, IN

This page compares the two common ways to raise a settled slab: mudjacking (cement slurry) and foam lifting (polyurethane / polyjacking). It is for Fort Wayne and nearby Northeast Indiana homeowners who need to read a quote, not pick a brand.

Want an expert look at your slab? Request a free quote and we’ll connect you with a local provider who can recommend the right method and put it in writing.

Updated November 19, 2026

Request a Quote

Both methods do the same physical job

A settled driveway, sidewalk, patio, or garage floor has lost support. Soil washed out, compacted, or changed volume. The slab is still there; the ground is not doing its job.

A leveling crew drills holes, injects a fill, lifts the slab toward level, and patches the holes.

The argument is not “does lifting work.” It is which fill, how heavy it is, how big the holes are, how soon you can use the surface, and what it costs. Those answers change with the slab — not because a homepage prefers one word.

Mudjacking at a glance

Mudjacking (also called slabjacking) pumps a cement-based slurry under the slab. The mix is some combination of cement, sand or soil, and water; each shop has its own recipe. Pressure fills the void and raises the concrete.

Typical traits:

  • Larger holes than foam, often in the 1- to 2-inch range, then patched.
  • Heavier fill. Fine under a thick outdoor slab. A real question under a thin slab or weak soil.
  • Longer wait before you park, because slurry needs time to set. Weather matters.
  • Usually the lower-cost conversation on a simple, accessible panel.

It is the method a lot of Midwest residential work has used for decades. It fails the same way any lift fails: the slab was too broken, the void was misread, or water keeps taking soil out after the crew leaves.

Foam lifting at a glance

Foam lifting injects expanding polyurethane through smaller holes. You will also hear polyjacking, poly leveling, or polyurethane foam injection — same family of work.

Typical traits:

  • Smaller holes, closer to a large coin than a golf ball, then patched.
  • Light fill. Useful when you do not want to add much weight to soil that already gave way.
  • Faster return to service on many jobs. Crews often say same-day walk or drive — confirm for your mix and temperature.
  • Usually the higher material cost. You pay for the foam and the equipment that meters it.

Foam is not automatically better, and it is not automatically overkill. A thin patio, a tight garage, or a slab that should not take extra weight is why foam shows up. A long, thick driveway with easy truck access is why mud still shows up.

Side by side

Mudjacking Foam lifting
Material Cement-based slurry Expanding polyurethane
Holes Larger Smaller
Weight added More Less
Typical reuse Longer cure Often sooner
Usual cost talk Lower Higher
Common fit Accessible outdoor panels Tight access, lighter slabs, faster reuse

That table is a starting point for questions, not a spec sheet. Ask what they drill and when you can park.

Cost: sourced national figures

Here are published national ranges to get you started; your local written quote sets the real number.

A-1 Concrete Leveling’s 2026 cost guide (updated March 4, 2026) reports mudjacking at $3–$6 per square foot according to Angi, foam at $5–$25 per square foot according to sources across the web, and most of A-1’s own stone-slurry jobs in the $1,100–$1,500 range. (Stone slurry is a cousin of mudjacking, not the same mix.) Those are national bands. Your driveway can land anywhere inside them, or outside them.

What moves the quote: number of panels and how far they dropped; void depth (material volume, not just square footage); truck and hose access; interior garage vs open driveway vs fenced patio; crack, joint, or drainage work added to the lift; and a decision that the slab should be replaced instead.

Ask for a written quote that names the method and the extras. If you want both methods priced, say so on the quote form.

Fort Wayne soil and drainage (Midwest / Indiana fact)

Northern Indiana freeze-thaw and clay/till soils are ordinary construction conditions — not a “settlement report” we generated for this URL.

  • Water is the second job. A downspout at the driveway edge, or a grade that still pitches under a sidewalk, will drop a lifted slab again. Fix the water or you are buying a pause.
  • Weight vs weak support. Clay that swells and shrinks is already a moving target. Heavy slurry under a thin slab is a question worth asking. Foam’s lighter fill is one reason it gets recommended there — not a reason to skip drainage.
  • Apron at the garage. Common Midwest failure line. The provider should say whether they are lifting the driveway, the garage slab, or both, and whether the joint will still hold water.

Soil varies from lot to lot, from Aboite to New Haven, so an on-site visit is the best way to know.

When mudjacking may be the better fit

The slab is a standard outdoor driveway or sidewalk panel, still in large pieces. A truck can get close. You care more about a lower bid than a same-day drive-on. The void is not a reason to keep weight off the soil.

Ask: hole size and patch, cure time before parking, and whether they will look at the downspout.

When foam may be the better fit

Access is tight (fenced patio, interior garage, slab against a finished wall). The slab is thinner, or the soil already failed once. You need the surface back quickly. Smaller patches matter (more cosmetic, still not invisible).

Ask: foam density, how they avoid over-raising, and what happens if foam finds a crack or a drain.

When replacement wins

Leveling is not a kindness if the concrete is done. Replacement is the better quote when the slab is in many pieces or the edges have crumbled; you can see failed reinforcement; the pitch problem is the pour itself, not only the void; water will keep removing support and nobody is proposing a drainage fix; or a garage floor looks like foundation movement, not a slabjacking job.

Ask for the replace price next to the lift price when the slab is ugly. A page that only says “lift it, it’s cheaper” is doing what the thin city-door sites already do.

Questions to take to the provider

  1. Which method are you recommending, and what did you rule out?
  2. How many holes, and how will they be patched?
  3. When can I walk or park on it?
  4. What is included — lift only, or joints, cracks, and drainage?
  5. What do you warranty, in writing, and what voids it?
  6. If this drops again, is the next conversation another lift or a tear-out?

A good provider will be glad to answer all of these.

Request a Fort Wayne quote

Describe the surface and the city or ZIP. We’ll connect you with a provider serving Fort Wayne and nearby communities. Ask them to compare methods on your slab.

Request a Quote

Call (260) 254-8345

Educational comparison to help you read quotes with confidence.